REC Q BMS for up to 16 cells Victron Comp

Lager
På lager
Pris
kr 7 320,00
REC REC Q BMS for up to 16 cells Victron Comp

REC Q BMS er markedstandarden for større Lithium banker i 24 eller 48 volt.

Produktet er gjennomprøvd og med alt tilgjengelig tilbehør et klart valg. Farco leverer denne BMS-en tilpasset Victron sine ladere eller Kombier (lader/inverter i ett) med løsning for å kommunisere VE.Direct over et GX til CanBUS. Det gjør i praksis at BMS styrer lader med 1/1000 volt nøyaktighet og sørger for perfect ballansering og kontroll over batteribanken din.

Se REC sin video over hvordan denne typisk kan kobles opp!

REC Q BMS: for up to 16 cells in series single cell voltage measurement (0.1 – 5.0 V, resolution 1 mV) single cell - under/over voltage protection single cell internal resistance measurement SOC and SOH calculation over temperature protection (up to 3 temperature sensors) under temperature charging protection passive cell balancing up to 0.9 A per cell shunt current measurement (resolution 19 mA @ ± 500 A) galvanically isolated user defined multi-purpose digital input/output reduced 1 s measuring interval balancing transistors defect check @ restart EEPROM memory data corruption check @ restart cell's voltage RMS voltage measurement self calibration @ restart BMS shutdown @ 0.98 x minimum cell disconnect threshold Ah counting RS - 485 communication: galvanically isolated RS-485 communication fully compatible with REC LCD touch display and PC user interface BMS Master control Galvanically Isolated CAN: galvanically isolated CAN 100, 125, 250, 500, 1 MHz bit-rate selection message programming disable option Connection instructions: Dimensions: length with connectors = 104 mm width with mounting pads = 190 mm width = 165 mm height = 39 mm mounting hole diameter = 4.5 mm We suggest M4 screws for mounting.

 

Varenr.
10412

Dokumenter

Din nettleser er utdatert!

For å kunne bruke alle funksjoner på nettsiden må du oppdatere nettleseren. Oppdater min nettleser nå

×